[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Debian: sdc1 fehlt in /dev/ nach Upgrade auf Squeeze
[Thread Prev] | [Thread Next]
- Subject: Re: Debian: sdc1 fehlt in /dev/ nach Upgrade auf Squeeze
- From: Peter Mueller <peter.o.mueller@xxxxxx>
- Date: Mon, 14 Feb 2011 17:39:01 +0100
- To: uugrn@xxxxxxxxxxxxxxx
Hallo On 14.02.2011, at 15:46, Alexander Holler wrote: > Hallo, > > Am 13.02.2011 20:30, schrieb Peter Mueller: >> ich habe meinen Debian Server auf Squeeze hochgehoben. >> >> Nun kann ich nicht mehr auf die Partition auf der 3. Platte zugreifen (es gibt dort nur eine) >> >> - mit sda ist alles ok. sda1 und sda2 sind vorhanden (root und swap) >> - fdisk zeigt auf sdc und sdb jeweils eine Partition an >> - sdb1 kann ich testweise per Hand mounten (mount /dev/sdb1 /tst -t ext3) >> - sdc1 nicht. Der Grund dafuer ist (meine Vermutung), dass in /dev >> kein Eintrag fuer /dev/sdc1 ist. Es gibt nur einen fuer /dev/sdc >> >> Woran kann das liegen? Muss ich udev irgendwo anpassen? >> >> >> Hat jemand einen Tip? > > dmesg Hier folgt der output von dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-30) (ben@xxxxxxxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000feeb000 (usable) [ 0.000000] BIOS-e820: 000000000feeb000 - 000000000feef000 (ACPI data) [ 0.000000] BIOS-e820: 000000000feef000 - 000000000feff000 (reserved) [ 0.000000] BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0xfeeb max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF0000000 write-back [ 0.000000] 1 base 00FF00000 mask FFFF00000 uncachable [ 0.000000] 2 base 0F8000000 mask FFC000000 write-combining [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-000000000feeb000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 000fc00000 page 2M [ 0.000000] 000fc00000 - 000feeb000 page 4k [ 0.000000] kernel direct mapping tables up to feeb000 @ 7000-d000 [ 0.000000] RAMDISK: 0b6fc000 - 0bf70262 [ 0.000000] ACPI: RSDP 000f7350 00014 (v00 ASUS ) [ 0.000000] ACPI: RSDT 0feeb000 0002C (v01 ASUS CUSL2 30303031 MSFT 31313031) [ 0.000000] ACPI: FACP 0feeb080 00074 (v01 ASUS CUSL2 30303031 MSFT 31313031) [ 0.000000] ACPI: DSDT 0feeb100 03578 (v01 ASUS CUSL2 00001000 MSFT 0100000B) [ 0.000000] ACPI: FACS 0feff000 00040 [ 0.000000] ACPI: BOOT 0feeb040 00028 (v01 ASUS CUSL2 30303031 MSFT 31313031) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 254MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0feeb000 [ 0.000000] low ram: 0 - 0feeb000 [ 0.000000] node 0 low ram: 00000000 - 0feeb000 [ 0.000000] node 0 bootmap 00002000 - 00003fe0 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000feeb000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014c9bb4] TEXT DATA BSS ==> [0001000000 - 00014c9bb4] [ 0.000000] #4 [000b6fc000 - 000bf70262] RAMDISK ==> [000b6fc000 - 000bf70262] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [00014ca000 - 00014d014c] BRK ==> [00014ca000 - 00014d014c] [ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000feeb [ 0.000000] HighMem 0x0000feeb -> 0x0000feeb [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0000feeb [ 0.000000] On node 0 totalpages: 65163 [ 0.000000] free_area_init_node: node 0, pgdat c13b2860, node_mem_map c14d2000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3968 pages, LIFO batch:0 [ 0.000000] Normal zone: 478 pages used for memmap [ 0.000000] Normal zone: 60685 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xe408 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at ff00000 (gap: ff00000:f00f0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34296 r0 d23048 u4194304 [ 0.000000] pcpu-alloc: s34296 r0 d23048 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64653 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=96789f53-c8f0-4b44-b42c-f5684fa569aa ro quiet [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 244372k/261036k available (2501k kernel code, 15952k reserved, 1323k data, 376k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xd06eb000 - 0xff3fe000 ( 749 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcfeeb000 ( 254 MB) [ 0.000000] .init : 0xc13bd000 - 0xc141b000 ( 376 kB) [ 0.000000] .data : 0xc12716a1 - 0xc13bc460 (1323 kB) [ 0.000000] .text : 0xc1000000 - 0xc12716a1 (2501 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 804.145 MHz processor. [ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 1608.29 BogoMIPS (lpj=3216580) [ 0.004071] Security Framework initialized [ 0.004090] SELinux: Disabled at boot. [ 0.004111] Mount-cache hash table entries: 512 [ 0.004475] Initializing cgroup subsys ns [ 0.004488] Initializing cgroup subsys cpuacct [ 0.004500] Initializing cgroup subsys devices [ 0.004509] Initializing cgroup subsys freezer [ 0.004516] Initializing cgroup subsys net_cls [ 0.004586] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.004595] CPU: L2 cache: 256K [ 0.004610] mce: CPU supports 5 MCE banks [ 0.004657] Performance Events: [ 0.004665] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.004672] no hardware sampling interrupt available. [ 0.004678] p6 PMU driver. [ 0.004713] ... version: 0 [ 0.004718] ... bit width: 32 [ 0.004724] ... generic registers: 2 [ 0.004730] ... value mask: 00000000ffffffff [ 0.004736] ... max period: 000000007fffffff [ 0.004742] ... fixed-purpose events: 0 [ 0.004748] ... event mask: 0000000000000003 [ 0.004762] Checking 'hlt' instruction... OK. [ 0.020668] SMP alternatives: switching to UP code [ 0.028085] Freeing SMP alternatives: 13k freed [ 0.028125] ACPI: Core revision 20090903 [ 0.034668] ACPI: setting ELCR to 0200 (from 1e00) [ 0.034991] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.035000] weird, boot CPU (#0) not listed by the BIOS. [ 0.035006] SMP motherboard not detected. [ 0.035014] Local APIC not detected. Using dummy APIC emulation. [ 0.035019] SMP disabled [ 0.035712] Brought up 1 CPUs [ 0.035723] Total of 1 processors activated (1608.29 BogoMIPS). [ 0.036066] CPU0 attaching NULL sched-domain. [ 0.036445] devtmpfs: initialized [ 0.037773] regulator: core version 0.5 [ 0.037944] NET: Registered protocol family 16 [ 0.038209] ACPI: bus type pci registered [ 0.040307] PCI: PCI BIOS revision 2.10 entry at 0xf0da0, last bus=1 [ 0.040315] PCI: Using configuration type 1 for base access [ 0.041451] bio: create slab <bio-0> at 0 [ 0.042577] ACPI: EC: Look up EC in DSDT [ 0.052016] ACPI: Interpreter enabled [ 0.052030] ACPI: (supports S0 S1 S3 S4 S5) [ 0.052101] ACPI: Using PIC for interrupt routing [ 0.074155] ACPI: No dock devices found. [ 0.074443] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.074625] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff] [ 0.074639] pci 0000:00:02.0: reg 14 32bit mmio: [0xf7800000-0xf787ffff] [ 0.074828] pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO [ 0.074839] pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO [ 0.074898] pci 0000:00:1f.1: reg 20 io port: [0xb800-0xb80f] [ 0.074976] pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb41f] [ 0.075061] pci 0000:00:1f.3: reg 20 io port: [0xe800-0xe80f] [ 0.075137] pci 0000:00:1f.4: reg 20 io port: [0xb000-0xb01f] [ 0.075248] pci 0000:01:0a.0: reg 20 io port: [0xd800-0xd81f] [ 0.075285] pci 0000:01:0a.0: supports D1 D2 [ 0.075292] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.075303] pci 0000:01:0a.0: PME# disabled [ 0.075369] pci 0000:01:0a.1: reg 20 io port: [0xd400-0xd41f] [ 0.075406] pci 0000:01:0a.1: supports D1 D2 [ 0.075413] pci 0000:01:0a.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.075423] pci 0000:01:0a.1: PME# disabled [ 0.075471] pci 0000:01:0a.2: reg 10 32bit mmio: [0xf7000000-0xf70000ff] [ 0.075526] pci 0000:01:0a.2: supports D1 D2 [ 0.075534] pci 0000:01:0a.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.075543] pci 0000:01:0a.2: PME# disabled [ 0.075604] pci 0000:01:0b.0: reg 10 io port: [0xd000-0xd0ff] [ 0.075619] pci 0000:01:0b.0: reg 14 32bit mmio: [0xf6800000-0xf68000ff] [ 0.075670] pci 0000:01:0b.0: supports D1 D2 [ 0.075678] pci 0000:01:0b.0: PME# supported from D1 D2 D3hot D3cold [ 0.075687] pci 0000:01:0b.0: PME# disabled [ 0.075731] pci 0000:00:1e.0: transparent bridge [ 0.075741] pci 0000:00:1e.0: bridge io port: [0xc000-0xdfff] [ 0.075752] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6800000-0xf77fffff] [ 0.075772] pci_bus 0000:00: on NUMA node 0 [ 0.075787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.075981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 0.138296] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.138567] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.138810] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.139079] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.139310] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.139545] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.139782] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.140081] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.140364] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.140386] vgaarb: loaded [ 0.140635] PCI: Using ACPI for IRQ routing [ 0.141013] Switching to clocksource tsc [ 0.144001] pnp: PnP ACPI init [ 0.144001] ACPI: bus type pnp registered [ 0.151569] pnp: PnP ACPI: found 13 devices [ 0.151578] ACPI: ACPI bus type pnp unregistered [ 0.151593] PnPBIOS: Disabled by ACPI PNP [ 0.151627] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.151638] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.151649] system 00:00: iomem range 0x100000-0xfefffff could not be reserved [ 0.151672] system 00:03: ioport range 0x3f0-0x3f1 has been reserved [ 0.151682] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.151701] system 00:04: ioport range 0xe400-0xe47f has been reserved [ 0.151712] system 00:04: ioport range 0xec00-0xec3f has been reserved [ 0.186949] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.186960] pci 0000:00:1e.0: IO window: 0xc000-0xdfff [ 0.186973] pci 0000:00:1e.0: MEM window: 0xf6800000-0xf77fffff [ 0.186982] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.187011] pci 0000:00:1e.0: setting latency timer to 64 [ 0.187025] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.187034] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.187044] pci_bus 0000:01: resource 0 io: [0xc000-0xdfff] [ 0.187053] pci_bus 0000:01: resource 1 mem: [0xf6800000-0xf77fffff] [ 0.187062] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.187070] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.187178] NET: Registered protocol family 2 [ 0.187473] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.188413] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.188606] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.188795] TCP: Hash tables configured (established 8192 bind 8192) [ 0.188803] TCP reno registered [ 0.189053] NET: Registered protocol family 1 [ 0.189118] pci 0000:00:02.0: Boot video device [ 0.189351] Unpacking initramfs... [ 0.943875] Freeing initrd memory: 8656k freed [ 0.985300] Simple Boot Flag at 0x3a set to 0x1 [ 0.986012] audit: initializing netlink socket (disabled) [ 0.986056] type=2000 audit(1297707612.982:1): initialized [ 0.998853] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.003834] VFS: Disk quotas dquot_6.5.2 [ 1.004043] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.004315] msgmni has been set to 494 [ 1.004965] alg: No test for stdrng (krng) [ 1.005066] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.005076] io scheduler noop registered [ 1.005082] io scheduler anticipatory registered [ 1.005088] io scheduler deadline registered [ 1.005218] io scheduler cfq registered (default) [ 1.005695] isapnp: Scanning for PnP cards... [ 1.358491] isapnp: No Plug & Play device found [ 1.362939] Linux agpgart interface v0.103 [ 1.363142] agpgart-intel 0000:00:00.0: Intel i815 Chipset [ 1.369499] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 1.369700] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.369848] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.370007] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.370744] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.370982] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.371353] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.371361] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.372473] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.372733] mice: PS/2 mouse device common for all mice [ 1.372865] rtc_cmos 00:06: RTC can wake from S4 [ 1.372990] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.373022] rtc0: alarms up to one month, 242 bytes nvram [ 1.373057] cpuidle: using governor ladder [ 1.373064] cpuidle: using governor menu [ 1.373077] No iBFT detected. [ 1.374373] TCP cubic registered [ 1.374851] NET: Registered protocol family 10 [ 1.376443] lo: Disabled Privacy Extensions [ 1.377508] Mobile IPv6 [ 1.377532] NET: Registered protocol family 17 [ 1.377581] Using IPI No-Shortcut mode [ 1.377853] PM: Resume from disk failed. [ 1.377897] registered taskstats version 1 [ 1.378288] rtc_cmos 00:06: setting system clock to 2011-02-14 18:20:13 UTC (1297707613) [ 1.378355] Initalizing network drop monitor service [ 1.378443] Freeing unused kernel memory: 376k freed [ 1.380125] Write protecting the kernel text: 2504k [ 1.380196] Write protecting the kernel read-only data: 920k [ 1.395118] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.444348] udev[46]: starting version 164 [ 1.969457] SCSI subsystem initialized [ 2.041088] usbcore: registered new interface driver usbfs [ 2.041557] usbcore: registered new interface driver hub [ 2.050199] usbcore: registered new device driver usb [ 2.154906] libata version 3.00 loaded. [ 2.167192] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.167280] ehci_hcd 0000:01:0a.2: enabling device (0014 -> 0016) [ 2.168323] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 2.168331] PCI: setting IRQ 11 as level-triggered [ 2.168343] ehci_hcd 0000:01:0a.2: PCI INT C -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 2.168389] ehci_hcd 0000:01:0a.2: EHCI Host Controller [ 2.168492] ehci_hcd 0000:01:0a.2: new USB bus registered, assigned bus number 1 [ 2.168596] ehci_hcd 0000:01:0a.2: irq 11, io mem 0xf7000000 [ 2.180971] ehci_hcd 0000:01:0a.2: USB 2.0 started, EHCI 1.00 [ 2.181077] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.181086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.181095] usb usb1: Product: EHCI Host Controller [ 2.181102] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 2.181110] usb usb1: SerialNumber: 0000:01:0a.2 [ 2.181408] usb usb1: configuration #1 chosen from 1 choice [ 2.181506] hub 1-0:1.0: USB hub found [ 2.181538] hub 1-0:1.0: 4 ports detected [ 2.182555] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.182617] 8139cp 0000:01:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 2.200081] uhci_hcd: USB Universal Host Controller Interface driver [ 2.201235] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 [ 2.201244] PCI: setting IRQ 12 as level-triggered [ 2.201257] uhci_hcd 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12 [ 2.201278] uhci_hcd 0000:00:1f.2: setting latency timer to 64 [ 2.201287] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 2.201333] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 2 [ 2.201387] uhci_hcd 0000:00:1f.2: irq 12, io base 0x0000b400 [ 2.201525] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.201535] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.201543] usb usb2: Product: UHCI Host Controller [ 2.201550] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 2.201558] usb usb2: SerialNumber: 0000:00:1f.2 [ 2.202131] usb usb2: configuration #1 chosen from 1 choice [ 2.202349] hub 2-0:1.0: USB hub found [ 2.202382] hub 2-0:1.0: 2 ports detected [ 2.203407] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 [ 2.203415] PCI: setting IRQ 9 as level-triggered [ 2.203427] uhci_hcd 0000:00:1f.4: PCI INT C -> Link[LNKH] -> GSI 9 (level, low) -> IRQ 9 [ 2.203444] uhci_hcd 0000:00:1f.4: setting latency timer to 64 [ 2.203453] uhci_hcd 0000:00:1f.4: UHCI Host Controller [ 2.203484] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 3 [ 2.203532] uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000b000 [ 2.203658] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.203667] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.203676] usb usb3: Product: UHCI Host Controller [ 2.203683] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 2.203690] usb usb3: SerialNumber: 0000:00:1f.4 [ 2.204252] usb usb3: configuration #1 chosen from 1 choice [ 2.204461] hub 3-0:1.0: USB hub found [ 2.204495] hub 3-0:1.0: 2 ports detected [ 2.204663] uhci_hcd 0000:01:0a.0: enabling device (0014 -> 0015) [ 2.205603] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 [ 2.205616] uhci_hcd 0000:01:0a.0: PCI INT A -> Link[LNKG] -> GSI 11 (level, low) -> IRQ 11 [ 2.205637] uhci_hcd 0000:01:0a.0: UHCI Host Controller [ 2.205669] uhci_hcd 0000:01:0a.0: new USB bus registered, assigned bus number 4 [ 2.205717] uhci_hcd 0000:01:0a.0: irq 11, io base 0x0000d800 [ 2.205842] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.205852] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.205860] usb usb4: Product: UHCI Host Controller [ 2.205867] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 2.205874] usb usb4: SerialNumber: 0000:01:0a.0 [ 2.206363] usb usb4: configuration #1 chosen from 1 choice [ 2.206582] hub 4-0:1.0: USB hub found [ 2.206616] hub 4-0:1.0: 2 ports detected [ 2.206789] uhci_hcd 0000:01:0a.1: enabling device (0014 -> 0015) [ 2.206815] uhci_hcd 0000:01:0a.1: PCI INT B -> Link[LNKH] -> GSI 9 (level, low) -> IRQ 9 [ 2.206835] uhci_hcd 0000:01:0a.1: UHCI Host Controller [ 2.206862] uhci_hcd 0000:01:0a.1: new USB bus registered, assigned bus number 5 [ 2.206908] uhci_hcd 0000:01:0a.1: irq 9, io base 0x0000d400 [ 2.207028] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.207037] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.207046] usb usb5: Product: UHCI Host Controller [ 2.207053] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 2.207060] usb usb5: SerialNumber: 0000:01:0a.1 [ 2.207496] usb usb5: configuration #1 chosen from 1 choice [ 2.207687] hub 5-0:1.0: USB hub found [ 2.207718] hub 5-0:1.0: 2 ports detected [ 2.222549] ata_piix 0000:00:1f.1: version 2.13 [ 2.222698] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.225700] scsi0 : ata_piix [ 2.226408] scsi1 : ata_piix [ 2.228424] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14 [ 2.228435] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15 [ 2.237862] 8139too Fast Ethernet driver 0.9.28 [ 2.237978] 8139too 0000:01:0b.0: enabling device (0004 -> 0007) [ 2.238005] 8139too 0000:01:0b.0: PCI INT A -> Link[LNKH] -> GSI 9 (level, low) -> IRQ 9 [ 2.240789] eth0: RealTek RTL8139 at 0xd000, 00:50:fc:f4:c6:62, IRQ 9 [ 2.392762] ata2.00: ATA-7: SAMSUNG SP2514N, VF100-50, max UDMA/100 [ 2.392774] ata2.00: 488397168 sectors, multi 16: LBA48 [ 2.392842] ata2.00: limited to UDMA/33 due to 40-wire cable [ 2.401132] ata1.00: ATA-4: WDC WD102AA, 05.05B05, max UDMA/66 [ 2.401142] ata1.00: 20044080 sectors, multi 16: LBA [ 2.401356] ata1.01: ATA-7: SAMSUNG SP2514N, VF100-50, max UDMA/100 [ 2.401366] ata1.01: 488397168 sectors, multi 16: LBA48 [ 2.401430] ata1.00: limited to UDMA/33 due to 40-wire cable [ 2.401438] ata1.01: limited to UDMA/33 due to 40-wire cable [ 2.417088] ata1.00: configured for UDMA/33 [ 2.432396] ata2.00: configured for UDMA/33 [ 2.448391] ata1.01: configured for UDMA/33 [ 2.448731] scsi 0:0:0:0: Direct-Access ATA WDC WD102AA 05.0 PQ: 0 ANSI: 5 [ 2.449736] scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP2514N VF10 PQ: 0 ANSI: 5 [ 2.450641] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP2514N VF10 PQ: 0 ANSI: 5 [ 2.503748] sd 0:0:0:0: [sda] 20044080 512-byte logical blocks: (10.2 GB/9.55 GiB) [ 2.503959] sd 0:0:0:0: [sda] Write Protect is off [ 2.503969] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.504148] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.504651] sda: [ 2.506345] sd 1:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.506542] sd 1:0:0:0: [sdc] Write Protect is off [ 2.506552] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.506635] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.507106] sdc: [ 2.516059] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 2.518095] sdc1 [ 2.519963] sd 1:0:0:0: [sdc] Attached SCSI disk [ 2.523628] sda1 sda2 [ 2.542057] sd 0:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.542773] sd 0:0:1:0: [sdb] Write Protect is off [ 2.542785] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.542908] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.544835] sdb: [ 2.550927] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.550971] sdb1 [ 2.552792] sd 0:0:1:0: [sdb] Attached SCSI disk [ 2.686500] usb 3-2: New USB device found, idVendor=058f, idProduct=9254 [ 2.686512] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.686521] usb 3-2: Product: Generic USB Hub [ 2.686527] usb 3-2: Manufacturer: ALCOR [ 2.686830] usb 3-2: configuration #1 chosen from 1 choice [ 2.688707] hub 3-2:1.0: USB hub found [ 2.690569] hub 3-2:1.0: 4 ports detected [ 3.066309] PM: Starting manual resume from disk [ 3.066324] PM: Resume from partition 8:2 [ 3.066329] PM: Checking hibernation image. [ 3.066781] PM: Error -22 checking image file [ 3.066788] PM: Resume from disk failed. [ 3.140202] kjournald starting. Commit interval 5 seconds [ 3.140237] EXT3-fs: mounted filesystem with ordered data mode. [ 5.849528] udev[259]: starting version 164 [ 6.728255] ACPI: Invalid PBLK length [5] [ 6.728421] processor LNXCPU:00: registered as cooling_device0 [ 6.797651] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 6.797672] ACPI: Power Button [PWRB] [ 6.797887] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 6.797900] ACPI: Power Button [PWRF] [ 6.896400] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 6.914595] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.974567] parport_pc 00:09: reported by Plug and Play ACPI [ 6.974624] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 7.142465] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 7.142477] PCI: setting IRQ 10 as level-triggered [ 7.142489] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 7.142505] ACPI: I/O resource 0000:00:1f.3 [0xe800-0xe80f] conflicts with ACPI region SM00 [0xe800-0xe806] [ 7.142557] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.161444] Intel 82802 RNG detected [ 7.217615] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.012309] Error: Driver 'pcspkr' is already registered, aborting... [ 9.555872] Adding 449812k swap on /dev/sda2. Priority:-1 extents:1 across:449812k [ 9.837555] EXT3 FS on sda1, internal journal [ 10.501372] Uniform Multi-Platform E-IDE driver [ 10.523464] ide-cd driver 5.00 [ 10.552249] ide-gd driver 1.18 [ 10.693317] md: raid1 personality registered for level 1 [ 10.963945] md: md0 stopped. [ 10.975002] md: bind<sdc> [ 11.316173] EXT3-fs: unable to read superblock [ 12.702651] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 23.264025] eth0: no IPv6 routers present Danke und Gruss, Peter -- Peter Mueller peter.o.mueller@xxxxxx -- UUGRN e.V. http://www.uugrn.org/ http://mailman.uugrn.org/mailman/listinfo/uugrn Wiki: https://wiki.uugrn.org/UUGRN:Mailingliste Archiv: http://lists.uugrn.org/